*** Polish translation - Polskie tłumaczenie
Moderators: XnTriq, helmut, xnview
*** Polish translation - Polskie tłumaczenie
I know that in XnView already is polish translation but it is old (for 1.90.1) so not all the strings are translated.
So I've made my own using Restorator
P.S. Is there posibility to get english version of dll? (or even those strings in english because for good translation it would be more convienient - xnview.exe is protected, so I can't get the resource for translation)
So I've made my own using Restorator
P.S. Is there posibility to get english version of dll? (or even those strings in english because for good translation it would be more convienient - xnview.exe is protected, so I can't get the resource for translation)
Last edited by Skiff on Wed Feb 21, 2007 11:49 am, edited 1 time in total.
Requested…
Hello !
• Pierre promised to do the text-files for the 2.0 version, so all these issues will be solved…
- Support welcome, of course…
Kind regards,
Claude
Clo
• Officially, not yet, although this has been suggested IN THIS THREAD, and largely supported as a temporary ease……P.S. Is there possibility to get english version of dll?…
• Pierre promised to do the text-files for the 2.0 version, so all these issues will be solved…
- Support welcome, of course…
• The EXE is Aspack compressed……xnview.exe is protected, so I can't get the resource for translation…
Kind regards,
Claude
Clo
Old user ON SELECTIVE STRIKE till further notice •
Re: Polish translation
Please contact me by PM or email, and i'll send you the text filesSkiff wrote:I know that in XnView already is polish translation but it is old (for 1.90.1) so not all the strings are translated.
So I've made my own using Restorator:
http://skiff_spolszczenia.republika.pl/files/xnviewpl.zip
P.S. Is there posibility to get english version of dll? (or even those strings in english because for good translation it would be more convienient - xnview.exe is protected, so I can't get the resource for translation)
Pierre.
Re: Polish translation
As for as I've looked at it, both unpacking exe and creating English dll shouldn't be a problem.Skiff wrote:P.S. Is there posibility to get english version of dll? (or even those strings in english because for good translation it would be more convienient - xnview.exe is protected, so I can't get the resource for translation)
Re: Polish translation
Translating/hacking the DLLs is a solution for one single version of XnView and/or testing purposes, but this is not recommended and what we want, here. Please wait till Pierre sends you the appropriate text files for translation.Anon wrote:As for as I've looked at it, both unpacking exe and creating English dll shouldn't be a problem.Skiff wrote:P.S. Is there posibility to get english version of dll? (or even those strings in english because for good translation it would be more convienient - xnview.exe is protected, so I can't get the resource for translation)
Thank you in advance for your efforts in translating to Polish!
Clo's Mail Service
No problem, I will resend it to Pierre immediately…
KR
Claude
Clo
KR
Claude
Clo
Old user ON SELECTIVE STRIKE till further notice •
What do you mean? If there is something else to translate send it to me.xnview wrote:But it's better to translate the 2 text files, your translation will be lost for next release....
Last edited by Skiff on Wed Feb 21, 2007 11:51 am, edited 1 time in total.
O.k., again in bold and firered:
Translating/hacking the DLLs is a solution for one single version of XnView and/or testing purposes, but this is not recommended and what we want, here. Please wait till Pierre sends you the appropriate text files for translation.
To make a real, permanent translation Pierre has to send the translator two header files. After translation, the translator sends the header files back to Pierre for compilation into the DLL.
@Clo: When talking about translations please also tell people about the official way for translating. This will help to avoid misunderstandings in future.
Translating/hacking the DLLs is a solution for one single version of XnView and/or testing purposes, but this is not recommended and what we want, here. Please wait till Pierre sends you the appropriate text files for translation.
To make a real, permanent translation Pierre has to send the translator two header files. After translation, the translator sends the header files back to Pierre for compilation into the DLL.
@Clo: When talking about translations please also tell people about the official way for translating. This will help to avoid misunderstandings in future.
I understand that. Note that in first post I mentioned about editing resources of dll.
After that Clo (or someone else? - I don't remember) sent me .rc files - and I thougth that this was what I should do. File in the first post is not available any more. Only those .rc files which was sent to me - not the dll with modified sources
After that Clo (or someone else? - I don't remember) sent me .rc files - and I thougth that this was what I should do. File in the first post is not available any more. Only those .rc files which was sent to me - not the dll with modified sources
Yes I want to do this - but I thought I just did :/ (but I remember 3 files, 3 .rc files)xnview wrote:But it's better to translate the 2 text files, your translation will be lost for next release....
Sorry for the extra work, Skiff. The correct files are named "stringpo.h" and "xnviewpo.h", where "po" is the language code of polish (you have guess it ). Pierre will send those header files to you - given that you have mailed Pierre your e-mail address (for mail address please see here).Skiff wrote:Yes I want to do this - but I thought I just did :/
Thank you very much for updating the Polish translation!