0.84: Toolbar Command "Show" gone after adding and removing

Reported bugs that have been closed and/or resolved

Moderators: XnTriq, xnview, Dreamer

Post Reply
User avatar
helmut
Posts: 8153
Joined: Sun Oct 12, 2003 6:47 pm
Location: Frankfurt, Germany

0.84: Toolbar Command "Show" gone after adding and removing

Post by helmut » Wed Feb 15, 2017 2:52 pm

XnView: MP 0.84
OS: Windows 10 - 64bit

In the toolbar configuration, when adding a command and removing it, again, the command is no longer visible in the list of available commands.

Effect: User interface unclear

To reproduce:
1. Open XnView browser
2. Select Tools » Settings | Interface | Toolbar
3. Select command "Show" (=Show/Hide data pane, the second "Show" from top)
4. Press ">" button to add the selected command to the toolbar
5. Select the command "Show" you have just added in the list of commands in the toolbar.
6. Press "<" button to remove the selected command from the toolbar.
Actual behaviour (bug): Command "Show" is no longer listed in list of available commands.

Expected behaviour: Command "Show" is listed in the list of available commands, again.

Note: This problem might have something to do with the fact that there are currently three "Show" commands.

User avatar
xnview
Author of XnView
Posts: 31340
Joined: Mon Oct 13, 2003 7:31 am
Location: France
Contact:

Re: 0.84: Toolbar Command "Show" gone after adding and remov

Post by xnview » Wed Feb 15, 2017 8:40 pm

O.k., thank you, I can also reproduce the problem. Issue 1104 is fixed in next version.
Pierre.

vertigo
Posts: 115
Joined: Wed Feb 15, 2017 3:49 pm

Re: 0.84: Toolbar Command "Show" gone after adding and remov

Post by vertigo » Fri Feb 17, 2017 8:00 pm

I discovered some more info about this issue. Not sure if it would be helpful or not, but I'll post it just in case.

This happens with the second AND third 'Show' items. Also, it happens if you add them, hit OK, then go back into the settings and remove them. They come back when closing and reopening settings.

User avatar
xnview
Author of XnView
Posts: 31340
Joined: Mon Oct 13, 2003 7:31 am
Location: France
Contact:

Re: 0.84: Toolbar Command "Show" gone after adding and remov

Post by xnview » Thu Mar 16, 2017 8:59 am

This problem is supposed to be fixed in XnView MP 0.85 beta 1. Please check and confirm the bug fix here.
Pierre.

vertigo
Posts: 115
Joined: Wed Feb 15, 2017 3:49 pm

Re: 0.84: Toolbar Command "Show" gone after adding and remov

Post by vertigo » Thu Mar 16, 2017 9:55 am

Confirmed fixed.

Post Reply